Safety Lamp of Houston Inc Safety Lamp of Houston Inc Safety Lamp of Houston Inc
airlamps  
TURBOLITE in use image
Ex Certificate - Bowl
  • 250 Watt Halogen Ultimate Output
  • Electronic Setting Device
  • Generator Overspeed Protector
  • Advanced Internal Topology Rotor Design
  • Spark Free Housings
  • International Market Leaders
  • Full Accessory Range Available
  • MSHA approval
  • Now available in lightweight aluminum
  • Does not trail an electric cord
:: Downloads ::
certificate - Airlamp non-Atex Sira
instruction manual - Turbolite Manual
leaflet - Turbolite Brochure
 
TURBOLITE

Product Information

The Turbolite range is the new generation of high powered compressed air driven lighting developed from the well known Wolf Airturbo. The Turbolite is certified for use in zones 1 and 2 hazardous areas. Common applications are in the Oil and Petrochemicals Industries, for tank cleaning and pipeline inspections, offering a safer alternative to low voltage lighting in dangerously wet conditions as well as where flammable gases and vapours can accumulate in confined spaces.

Turbolite A-TL44 - has a Bay Light fitting comprising a ball glass and protective polycarbonate dome to provide all-round, general purpose illumination. A hook provides for suspension of the lamp in the working area, or for simple fastening to a folding tripod.

Turbolite A-TL45 - has a reflector head fitting for direct illumination. Polished or matt reflectors give the option of a concentrated narrow beam or diffused wide angle illumination.

The housings of the Turbolites are cast brass, a spark free material, and the safety hook is also brass, but forged for extra strength. All external parts are nickel plated. Internal components are of durable design making the products suitable for use in the harshest industrial environments. A clean dry air supply is a condition of certification and essential for the efficient running of these lamps, otherwise contamination will deposit into the inside of the lens, reducing illumination levels. Suitable air-line filters can be supplied. Another mandatory requirement is the use of anti-static hose, to prevent the generation of unsafe levels of static electricity.

The 24 volt 250 watt tungsten halogen bulb is available in two types offering a choice of 6,000 lumens for 2,000 hours or 9,000 lumens for 200 hours. All items of spare parts including bulbs and alternative reflectors are readily available from stock.

Turbolite lamps are routinely run in, tested and set to the necessary output prior to despatch. The lamps are simple and easy to maintain and supplied with full maintenance instructions and spare parts diagrams and lists. In-house training on maintenance, setting and operation of air lamps is available.


Technical Specification


Wolf Turbolite A-TL44

250w with ball glass for all round illumination
Peak luminous intensity at 2.5m radius 70lux

Wolf Turbolite A-TL45
250w with polished reflector spot beam (approx 10°)
Peak luminous intensity at 5m 2000lux

Wolf Turbolite A-TL45
250w with matt reflector flood beam (approx 25°)
Peak luminous intensity at 5m 950lux

Technical Specification

Turbolite_chart
Accessories

Accessories

The Airturbo and Turbolite lighting systems are very flexible and can be adapted to all sorts of confined space applications varying from huge storage tanks to small sewers.

The Lamps can be suspended from bracing or spars, sited on platforms or mounted on tripod stands to illuminate the entry and working area as effectively as possible.

As previously emphasised, there are two important conditions of Certification which must be observed in any installation:

1. The supply hose must be of an Approved Anti-Static Type such that the electrical resistance between couplings must be within the limits of 104ohms (Min.) and 108ohms (Max.)

2. The compressed air supply should be clean, dry and uncontaminated.

Folding Tripod Stand A-300
This very strong and convenient tripod stand is available for mounting airlamps in such a way that illumination can be angled in most directions. The lamp can be clamped to the tripod head without the need of any tools. When not in use the tripod can be folded away for easy storage.

Anti-Static Compressed Air Hose (A-179 and A-180)
This special 12mm bore single braid hose is manufactured from an anti-static compound and is available in 18.3 metre (A-179) or 36.6 metre (A-180) lengths. Stainless Steel Hose Clips are provided but air line couplings are not for reasons of possible incompatibility.

Air Line Filters
A simple automatic drain airline filter (A-184) can be supplied, but where there are major difficulties in achieving the air quality required an ultra high efficiency filter system (A-186) is recommended, and, as with the simple filter, has the throughput capacity sufficient to power either two Turbolites or six Airturbo Lamps.

Tools and Spares
All of these items are available off the shelf and in special circumstances can be express shipped the same day in order to meet an urgent demand.

Repairs
The company offers a repair and refurbishment service for all its compressed air safety lamp products with the aim of completing these tasks within 7 days of receiving confirmation instructions. Repair instructions and procedures are written in accordance with ISO 9000 Standards.

Safety Lamp of Houston Inc
©2006 Safety Lamp of Houston Inc, All Rights Reserved. E&OE